PD97ES

PD97ES

Electrified Self-Latching Mortise Lock with
Monitoring Switches

Sensor-controlled electrified mortise lock for sliding doors sends automatic signals that engage or retract bolt

Features

Built to easily integrate into all standard access control systems and monitoring terminals, the PD97ES uses REX, DBM, and DPS sensors that interact with any access control system on the market, allowing monitoring panels at every opening for extra security at crucial access points. The PD97ES is suited for a wide range of applications including but not limited to hospitality, healthcare, commercial, office, and residential

Meets ANSI A117.1 Accessibility (ADA Compliant) and UL Standards for UL294 (Safety Access Control System Units), UL1034 (Safety Burglary-Resistant Electric Locking Mechanisms) and UL1784 (Smoke and Draft Control Door Assemblies)

Downloads

Data Sheet
How to Order (coming soon)
Installation Instructions (coming soon)
Templates (coming soon)
Product Code Guide (coming soon)
Three Part Specifications (coming soon)

PD97_at_its_most_beautiful

Specifications

Standard Door Thickness: 1-3/4" (45mm)
Thick Door Kits available
Slim Door Prep: 1-3/8" (35mm)
Trim Spacing Rim available
Backset: 2-3/4" (70mm) and 2-1/2" (63.5mm)
Voltage: 12/24 DC
Current Draw: Stepper Motor 0.6 AMPs
Bolt: 1" (25.4mm)
Lever Spindle: 8x8mm square
Thumbturn Spindle: 5x5mm square
Case Size: 8" x 3-3/8" x 11/16" (203mm x 85.8mm x 17mm)
Lever to Cylinder Center to Center: 3-7/8" (98mm)
Lever to Thumbturn Center to Center: 2-11/16" (68mm)
Handing: Specify handing
Lockcase: Field reversible without disassembly
Cylinder: Schlage C keyway 6 pin mortise with 2 keys

Compliance

  • ANSI A1171.1 Accessibility Code (ADA Compliant)
  • UL Standards: UL294, UL1034, and UL1784
  • ANSI/BHMA 156.36 certified and tested to Grade 1 standard of 250,000 cycles
PD97PT_power
Powered from the wall to the strike with a low 12/24 volt DC current, the PD97ES makes installation easy.
PD97ES_DPS
Lock includes contacts for Door Positioning, Request to Exit, and Deadbolt Monitoring Switches
PD97ES Lockcase Line Drawing copy
PD97ES - Exploded View copy
  • Door Position Detection
    • When sliding door closes, built-in door position switch (DPS triggers REX input connection to send power to the lock
  • Deadbolt Locked Detection
    • Once deadbolt is engaged in the strike, built-in Deadbolt Monitoring Switch (DMB) will check deadbolt is secured inside strike box
    • If deadbolt is not detected as locked, strike sends a signal to relay requesting power transfer to re-lock deadbolt
  • Request to Exit (REX) Switch
    • Sends a signal to the control panel that door is about to be opened by person intending to exit from secured area
  • Door Positioning Switch (DPS)
    • Sends a signal to control panel to monitor position of door
  • Deadbolt Monitoring Switch (DMS)
    • Sends a signal to control panel to monitor position of deadbolt

PD97 Series Entry Function

The touchless locking/unlocking and access control compatibility of the PD9700 Series of locks revolutionize the ways that security and safety can be applied in sliding door openings.

  • Hospitality
  • Healthcare
  • Commercial
  • Class A Office
  • High-end Residential

Functions

PD97ES10 Passage Line Drawing copy

Passage - 10

  • Latchbolt projected or retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Levers are active at all times
PD97ES53 Entrance Line Drawing copy

Entry - 53

  • Latchbolt projected or retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Key from outside to throw/retract latchbolt to lock unlock door
  • Thumbturn inside throws/retracts latchbolt to lock/unlock door
  • Outside lever is rigid at all times
  • Inside lever always unlocks latchbolt for emergency egress
PD97ES60 Exit Patio Line Drawing copy

Patio/Exit - 60

  • Deadbolt projected/retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Thumbturn inside throws/retracts deadbolt to lock/unlock door
  • Outside lever is rigid at all times
  • Inside lever always unlocks deadbolt for emergency egress
PD97ES80 Storeroom Line Drawing copy

Storeroom - 80

  • Latchbolt projected/retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Key from outside to throw/retract latchbolt to lock/unlock door
  • Door cannot be locked from inside
  • Outside lever is rigid at all times
  • Inside lever always unlocks latchbolt for emergency egress

Options

X_Series_Lever

X Series Levers

Grade 1 cast stainless steel trim designed for mechanical strength without sacrificing beautiful design. Includes ADA-compliant options.

AC-PB100-Access-Control-Hand-Wave

AC-PB100 Access Control Hand Wave

Allows contactless entry when door is unlocked. Features light-up display, 6" range infrared sensor, stainless steel faceplate. 12/24 DC power

tt07_thumbturn_indicator_ada

Thumbturns

Enable your privacy functions with design options and indicator windows. ADA options available.

CMB106_Cylinder

Cylinders

Explore Interchangeable Core (IC) cylinders and housing, keying options and trim collars.

Finishes

Standard

32D_squareA
32D Satin Stainless Steel

 

CeraMax

C19G_squareA
C19G Graphite Black

 

C19_squareA
C19 CeraMax Flat Black

 

CDB_squareA
CDB Dark Bronze

 

CGY_squareA
CGY Stormy Grey

Custom finishes including CeraMax are available with MOQ and extended lead times.