DC61_Cover

DC61 Series

Standard Duty Door Closer

ANSI/BHMA A156.4 Grade 1

Features

  • Rack & Pinion operation provides smooth, constant control of door through full opening and closing cycle
  • Closer body cast of special aluminum alloy machined to accommodate interactive steel components under operation conditions
  • 180° door swing when door, frame, and arm do not interfere
  • DC6126/DC6114 door closer is non-handed; can be installed on either right or left hand swing doors
  • Sweep speed control valve allows adjustment of door speed from open door's 90° position to approximately 10° from closed position
  • Tri-Packed DC61 Series includes self-tapping (SRT), sex nuts & bolts (SNB) and parallel arm (PA) bracket to allow for regular, top jamb, and parallel arm installation
  • Latch control valve allows adjustment of door latch speed from approximately 10° down to door’s fully closed position
  • Adjustable back check valve provides control of door in opening cycle from approximately 75° of door opening. Valve cushions door opening when door is forcibly opened beyond its preadjusted setting
  • Multi-Sized Door Closer Adjustable through the power range of 1 through 4
  • DC6114 door closer confirms to the opening force requirements of ADA and ANSI/BHMA standard A117.1 for interior doors
DC61
DC85 drawing

Specifications

DC6114 Power Size: 1 through 4
DC6126 Power Size: 2 through 6
Body: One-piece aluminum alloy body with rack & pinion design
Pressure Valves: Separate and independent latch, sweep, and back-check pressure valves
Handing: Non-handed; can be installed on either left- or right-handed swing doors
Cover: Standard Closer comes Less Cover
Piston: 34mm (1-11/32") diameter
Pinion Shaft: 16mm (5/8") diameter
Projection: 66.7mmm (2-5/8") without cover
Door Swing: Standard arm applications with covers allow doors up to 180° swing

Compliance

  • ANSI/BHMA A156.4 Grade 1 Closers
  • ANSI A117.1 ADA Accessibility (DC6114 Only)
  • UL Listed for ANSI/UL10B and UL10C
  • CAN/ULC S104 up to 3 Hours UL 228 UBC Standard 7-2 (1997)
  • NFPA 252 NFPA 80 National Fire Protection - Fire Door Assembly
  • NFPA101 National Fire Protection - Life Safety
  • ANSI/BHMA A156.18 Finishes

Standard Arm & Options

DC61_Standard_Arm

Regular / Parallel Arm

Regular arm with adjustable slider for wide range of frame conditions. Can be mounted to hinge (pull) side or top jamb

For parallel arm, mount bracket mount on top of frame on push side of door. Frame should be reinforced for bracket

Hold_Open_Arm

Hold Open Arm

DCAMHO

Adjustable round slide arm for wide range of frame conditions. Can be mounted with parallel bracket

Cush_Arm

Cush Arm

DCAMCUSH

Heavy duty forged arm with cush stop, parallel arm mount. Mount using frame reinforcement in stop

Hold_Open_Cush_Arm

Hold Open Cush Arm

DCAMHCUSH

Heavy duty forged arm with cush stop and hold-open parallel arm mount. Handle controls hold open function. Mount using frame reinforcement in stop

Sliding_Track_2

Sliding Track

Single lever (track) arm with surface-mounted closer for interior use on narrow-head frames and top rails. Three mounting positions

DCCV61SLC

Plastic Slim Cover

DCCV61SLC

Finishes

AL_Aluminum
AL
28 Aluminum Painted
CDB_squareA
DU
20 Duro/Dark Bronze Painted

 

Not all finishes are standard with each door closer. Custom finishes including CeraMax are available with MOQ and extended lead times.