PD97ES Lockcase

PD97ES

Electrified Mortise Lock with Monitoring Switches

Sensor-controlled electrified BHMA/ANSI Grade 1 mortise lock for sliding doors sends automatic signals that engage or retract bolt

Features

Built to easily integrate into all standard access control systems and monitoring terminals, the Grade 1 PD97ES uses REX, DBM, and DPS sensors that interact with any access control system on the market, allowing monitoring panels at every opening for extra security at crucial access points. The PD97ES is suited for a wide range of applications including but not limited to hospitality, healthcare, commercial, office, and residential.

Meets ANSI A117.1 Accessibility (ADA Compliant) and UL Standards for UL294 (Safety Access Control System Units), UL1034 (Safety Burglary-Resistant Electric Locking Mechanisms) and UL1784 (Smoke and Draft Control Door Assemblies).

PD97ES white cutout AOffice glamour

Specifications

Standard Door Thickness: 1-3/4" (45mm) Standard
1-3/8" (35mm) with Thin Door Kit
2" to 2-1/4" (50mm to 57mm) Thick Door Kits available
Backset: 2-3/4" (70mm) and 2-1/2" (63.5mm)
Lever to Cylinder Center to Center: 3-7/8" (98mm)
Lever to Thumbturn Center to Center: 2-11/16" (68mm)
Handing: Specify handing
Cylinder: Schlage C keyway 6 pin 1-1/4" mortise with 2 keys; optional SFIC and LFIC housing and cores available
CAM: CAM01-SCL Clover Cam

Electrical Specifications

Voltage: 12/24V DC
Max Voltage: 560 mA (lock body), 40 mA (strike)

Compliance

  • UL1034 Burglary-resistant Electric Locking Mechanisms
  • UL294 Standard for Access Control System Units
  • ANSI/BHMA A156.25 Electrified Mortise Locks
  • ANSI/BHMA A156.18 Finishes
  • ANSI A117.1 ADA Accessibility
PD97PT_power
Powered from the wall to the strike with a low 12/24 volt DC current, the PD97ES makes installation easy.
PD97ES_DPS
Lock includes contacts for Door Positioning, Request to Exit, and Deadbolt Monitoring Switches.

New Access Control Solutions for Sliding Door Security (1:33)

The PD97 Series is the industry’s first motor-driven, sensor-controlled mortise lock for sliding doors with true “touchless” functionality.

The ES model has an auto-locking function, as well as built-in monitoring switches for door position, deadbolt monitoring and Request To Exit.


 

PD97ES Lockcase Line Drawing copy
PD97ES - Exploded View copy
  • Door Position Detection
    • When sliding door closes, built-in Door Position Switch (DPS) triggers REX input connection to send power to the lock
  • Deadbolt Locked Detection
    • Once deadbolt is engaged in the strike, built-in Deadbolt Monitoring Switch (DBM) will verify deadbolt is secured inside strike box
    • If deadbolt is not detected as locked, strike sends signal to relay requesting power transfer to re-lock deadbolt
  • Request to Exit (REX) Switch
    • Sends signal to the control panel that door is about to be opened by person intending to exit from secured area
  • Door Positioning Switch (DPS)
    • Sends signal to control panel to monitor position of door
  • Deadbolt Monitoring Switch (DBM)
    • Sends signal to control panel to monitor position of deadbolt

Functions

PD97ES53 Entrance Line Drawing copy

Entrance - PD97ES53

  • Latchbolt projected or retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Key outside or thumbturn inside throws/retracts latchbolt to lock/unlock door
  • Outside lever is rigid at all times
  • Inside lever always unlocks latchbolt for emergency egress
PD97ES80 Storeroom Line Drawing copy

Storeroom - PD97ES80

  • Latchbolt projected/retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Key from outside to throw/retract latchbolt to lock/unlock door
  • Door cannot be locked from inside
  • Outside lever is rigid at all times
  • Inside lever always unlocks latchbolt for emergency egress
PD97ES60 Exit Patio Line Drawing copy

Patio/Exit - PD97ES60

  • Deadbolt projected/retracted by built-in stepper motor when energized by 12V/24V DC power transferred through contacts on lock and strike
  • Thumbturn inside throws/retracts deadbolt to lock/unlock door
  • Outside lever is rigid at all times
  • Inside lever always unlocks deadbolt for emergency egress

Options

XSeries_345_Image

X Series Levers

Grade 1 cast stainless steel trim designed for mechanical strength without sacrificing beautiful design. Includes ADA-compliant options.

Hand_Wave_Image

Extended Access Controls

Accessories for convenience, contactless entry when door is unlocked, and additional power and security, all with low 12/24 DC power.

tt07_thumbturn_sans_indicator_ada

Thumbturns

Enable your privacy functions with design options and indicator windows. ADA options available.

Cylinder_Image

Cylinders

Explore Interchangeable Core (IC) cylinders and housing, keying options and trim collars.

Finishes

Standard Finishes

32_squareA
32 Bright Stainless Steel
32D_squareA
32D Satin Stainless Steel
PVD4_squareA
PVD4 Satin Brass
(243 & 276 levers)

Ceramax Finishes

C19G_squareA
C19G Graphite Black
C19_squareA
C19 CeraMax Flat Black
CDB_squareA
CDB Dark Bronze
CGY_squareA
CGY Stormy Grey

Not all finishes are standard. Custom finishes including CeraMax are available with MOQ and extended lead times.

Where to Buy INOX Products